Home > Tools > Barrel Threading > Sizing Tools >

25457 0.545 Annular Cutter
25457  0.545 Annular Cutter

Alternative Views:

Our Price: $51.99

Stock Status: In Stock

Product Code: 25457

Annular cutter does not cut at exactly 0.545

This tool can be used to reduce a barrel OD (outside diameter) within close proximity to the size needed for M14 threads. The barrel OD can start out no larger than .875 for this to work properly. Extreme caution must be observed and we recommend only experienced machinists perform this operation.

The cutter should be ran at slow RPMs (around 200), lubricated constantly, and a pilot used to keep it centered on the barrel properly.

Pilots and drill chuck shank adapters are needed and are available on this site.

Drill Chuck Adapter (shank): 25583

10 different pilot choices: 25559

CNC Warrior expressly denies any liability for results that may occur from the proper, or improper, use of this tool. If you are unsure about using it, please do not order.

But if you need to cut a muzzle down to size before threading, and you don't have a lathe, this tool provides you with one of the most economical and practical means available for the job.

Share your knowledge of this product. Be the first to write a review »