Home > Tools >

25759 0.57 Annular Cutter Kit
0.57 Annular Cutter Kit


 
Our Price: $85.13

Stock Status: In Stock

Product Code: 25759


Annular Cutter Caliber Option:


Qty:  
Description
 
Annular cutter does not cut at exactly 0.57"

This tool can be used to reduce a barrel OD (outside diameter) within close proximity to the size needed for 9/16" threads. The barrel OD can start out no larger than .875 for this to work properly. Extreme caution must be observed and we recommend only experienced machinists perform this operation. The cutter should be ran at slow RPMs (around 200), lubricated constantly, and a pilot used to keep it centered on the barrel properly. A pilot and a drill chuck shank adapter are included in this kit. Make your choice of pilot in the drop down box. CNC Warrior expressly denies any liability for results that may occur from the proper, or improper, use of this tool. If you are unsure about using it, please do not order.

But if you need to cut a muzzle down to size before threading, and you don't have a lathe, this tool provides you with one of the most economical and practical means available for the job.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  3 of 3 people found the following review helpful:
 
5 of 5 FAL paratrooper barrel threading job August 22, 2018
Reviewer: Afghani Gunsmithing Guild from Grayslake, IL United States  
Used this tool to thread the barrel on my FAL
paratrooper conversion. Easy to use, produced a smooth, nice cut resulting in a perfect muzzle threading job. Buy with confidence.

Was this review helpful to you?