Return to 25362 AK/Saiga Sidefolder - Tubular
Sort By::
Page of 2
Click to see more items


  0 of 0 people found the following review helpful:
 
5 of 5 Did fit my PSAK-47 perfectly. Excellent stock. November 6, 2023
Reviewer: William Roberts from Largo, FL United States  
I'm not denying Anthony's experience, but my CNC Warriorfolding stock fit perfectly and works perfectly. Very pleased.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 DOES NOT FIT PALMETTO PSAK-47 September 24, 2022
Reviewer: Anthony Quesenberry from Arlington , TX United States  
There should be a list of AKs that this fits because it does not fit (American) PSAK-47 from Palmetto State Armory. It’s too wide.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Worth the wait; not exactly "In Stock" though. June 13, 2021
Reviewer: Christopher Delgado from Indianapolis , IN United States  
Got the stock over 3 weeks ago, but have waited to write a review until now.

The stock is sturdy and light. Looks just like it does in the picture, and perfectly fits my GP WASR 10/63 with the adjustable nut.

My one gripe is that CNC Warrior has the stock listed as "In Stock" when it really needs to be changed to "Made to order."

I feel this would avoid alot of the flak they've been getting for a while now about wait times. With the stock on my rifle now, I see why it took 6 weeks for it to be delivered.




Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 As advertised June 11, 2021
Reviewer: Anonymous Person from Pensacola, FL United States  
Recieved this and had it installed on my ZPAP92 in 5 minutes. Fit and look is phenomenal! Highly recommend this brace

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
5 of 5 Well worth the wait.... May 28, 2021
Reviewer: elia cossis from lutherville, MD United States  
This is my third stock purchase. Well worth the wait. You  just have to be patient. This isn't a big shop and everything is made by real people. Again, well worth the long 6 week + wait time.

Was this review helpful to you?

  4 of 5 people found the following review helpful:
 
2 of 5 Still waiting... May 4, 2021
Reviewer: Mike A from Portland, OR United States  
The recurring theme that's well-known is no communication and long wait times.

Order this stock in right-folding, warsaw length for my PSA GF3 on 22Mar2021. It's 3MAY which puts me at 6 weeks with no communication or notification of shipping.

I want to be optimistic that this will be an outstanding stock, but c'mon... the lead time and no communication. Fair rating for a known good product, but Poor for the communication.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Great stock, as long as you're patient. February 23, 2021
Reviewer: Jordan S from Tupelo, MS United States  
I knew when I ordered that I'd be waiting 4+ weeks for it to ship out. That being said, I still waited anxiously to receive it, and I'm very happy to report it's worth the wait.

I ordered the NATO length stock along with the rubber buttpad as I wasn't sure exactly how long I wanted the length of pull.

It did take just about 4 weeks on the dot to ship, but again, I knew that going in, so I can't fault CNC Warrior or Bonesteel for that. FedEx got it to me pretty quickly all things considered.  

As for the stock, it fits my WASR10's rear trunnion perfectly with the provided hardware. The folding mechanism seems strong; the cheekweld is great, and the buttplate/pad feels great against my shoulder. I just received it today, so I haven't taken it to the range yet, but it feels great.

Highly recommended. Just know it's going to take a few weeks to receive it, but it's worth the wait in my opinion.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Order still processing January 20, 2021
Reviewer: Anonymous from Olympia, WA United States  
Im in the same boat with the review below me. I ordered the stock on 11/30 and my order has yet to ship. CNC Warrior did respond to my emails, so ill give them that. Originally, it was on backorder 4+ weeks then i emailed them and they said it will be an additional 3-4 weeks which pushes the date out to the first week of February. Its baffling the item page says "In Stock". We'll see if I get it when anticipated. Im waiting patiently but losing patience. Ill update my rating when i receive the item. I have no doubt it will be great quality.

Edit: I just got my tracking number today

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
1 of 5 Would love to give a review... January 18, 2021
Reviewer: Cody from Athens, AL United States  
Would absolutely love to give a review on this stock, if I had it in hand to review.
Ordered on 30DEC2020, was charged for it almost immediately, and my order has been processing for 16 days now. As of 15JAN2021 the stock has yet to ship.
It was labeled as in stock when I purchased and still is listed as such.
Have had no reply to e-mails sent enquiring as to the order status.

I will gladly Come back, update, and write a review on the stock when it actually ships and I get it. But for now Im down $154 and have nothing to show for it.

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
3 of 5 Best way to get you to respond to an email? October 9, 2020
Reviewer: Phillip W from Nevada  
I’m kinda siding with this guy below my comment. Thinking no way there that bad. Just a warning if you have any amount of questions whatsoever they will not answer. Don’t give them the benefit of the doubt like I did. Hope the product is better then the customer service.

Was this review helpful to you?

   
  Click to see more items